Assembling with or without the VT6

From Spare Time Gizmos' Wiki

You do not have permission to edit this page, for the following reason:

You can view and copy the source of this page:

=== If you ''WILL'' be installing the VT6 daughter card === ---- * Install parts D2, D3, and R6 as directed in the next section * Install a 2 pin female header at J2 and a 10 pin female header at J4 Also, when building the VT6 you will need to omit a few parts and install a few others. ''The following instructions refer to the VT6 board and parts list, not the SBC6120-RC!'' * Omit VR1, C12, C13, D1, J2 and J3. * Install a 2 pin male header at J5 ''on the solder side of the VT6 PCB''. The pins will point downward. * Install a 10 pin male header at J6 ''on the solder side of the VT6 PCB''. '''NOTE'''<br> If you purchased the VT6 kit together with the SBC6120-RC, then VR1, C12, C13, D1, J2 and J3 will not be supplied and instead the two headers for J5 and J6 will be included. If you buy the VT6 separately, you will need to supply these two headers yourself. ---- When you are ready, proceed to [http://www.sparetimegizmos.com/wdoc/index.php?title=Assembling_the_PC_Board Assembling the PC board].

Return to Assembling with or without the VT6.