List of Errata and Addenda
From Spare Time Gizmos' Wiki
(Difference between revisions)
(Created page with "=== Elf 2000 Main Board === ---- * '''DS1210 VBAT2 grounding issue''' : On the Elk2K main board, chip U5, the DS1210, '''''MUST''''' have pin 7, VBAT2, tied to ground (Pin 4)....") |
(→Disk/UART/RTC/NVR Board) |
||
| Line 25: | Line 25: | ||
---- | ---- | ||
| + | * There is a minor errata on the Disk/UART/RTC/NVR Board. On U7, the 16C450 UART, pin 36 /CTS is an input which is not connected to anything. As far as I can tell from the datasheet this IC does not have pullups fitted so this pin should be connected to something. On my board I have run a wire from /RTS pin 32 to /CTS pin 36. | ||
---- | ---- | ||
Revision as of 08:59, 12 February 2012
Elf 2000 Main Board
- DS1210 VBAT2 grounding issue
- On the Elk2K main board, chip U5, the DS1210, MUST have pin 7, VBAT2, tied to ground (Pin 4).
- http://groups.yahoo.com/group/sparetimegizmos/message/4258
- http://groups.yahoo.com/group/cosmacelf/message/8644
- DS1210 datasheet PDF: http://www.jameco.com/Jameco/Products/ProdDS/114198.pdf
STG1861 Board
Disk/UART/RTC/NVR Board
- There is a minor errata on the Disk/UART/RTC/NVR Board. On U7, the 16C450 UART, pin 36 /CTS is an input which is not connected to anything. As far as I can tell from the datasheet this IC does not have pullups fitted so this pin should be connected to something. On my board I have run a wire from /RTS pin 32 to /CTS pin 36.
